Description
This multifunction cable tester measures cable lengths up to 1200 m, traces wires up to 3 km, checks cable mapping and faults and features NCV detection for safe and efficient network cable installation and troubleshooting.
Features:
Cable Length Measurement up to 1200M
- Measuring cable length to opens up to 1200M. Calibration accuracy: ±3%
- Length measurement in feet, yard or meters
- Cable length measurements without remote attached
Calibration Parameters
- Can determine actual Calibration parameters with known length of cable for cable length test
- Allows setting 1-7 Calibration parameters
Wire Tracing up to 3KM
- The tone and probe kit let you easily tracking wire directly in connection with live telecommunication equipment and router
Cable Mapping & status Indication
- Display the result of pin to pin cable mapping
- Display cable status and troubleshoot wiring for continuity, shorts, opens and crossover.
- Max support to 8 remote units
Non Contact Voltage detection
- Tests voltage from 90 ~ 1000V, special design to make sure the power is off before testing for circuit protection
Specifications:
| Model No. | MT-7071K |
| Cable types tested | RJ45 Lan cable Cat 5、5e、6、7 (UTP/STP)、RJ11/12 Telephone cable Cat 3 (2/4/6 pin)、Coaxial cable & normal solid/Stranded wire by alligator clips patch cord |
| Cable test modes | 1 KHz two-note tones for location and isolating cables, wire mapping for validate (detects wire continuity, shorts, opens, miswired, crossover) and open length tested. |
| Measurement technology | Cable capacitance method |
| Max. distance to opens for test | 1,200 meter (4,000 feet/1,300 yard) |
| Min. distance to opens for test | Split pairs：1 meter (3 feet)、Other cable：1.25 meter (4 feet) |
| Typical accuracy of length test | ±3.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard) |
| Calibration accuracy of length test | ±2.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard), standard cable ＞10 meter |
| Resolution & Unit of length test | 0.1 meter/ feet/ yard, Rate：1~3 sec./time |
| Calibrating parameters memory | 1~7 sets, allowing rewrite by new calibrating parameters |
| Max. distance of transmission & cable map | 3 km(1 kHz) & 300 m |
| Cable map & Shielded indication | LCD 1~8 & G |
| Other functions | Continuity test, Live telecommunication equipment test and router tes, Voltage protection AC 60V or DC 48V, Auto power off, Low battery display |
| Dimension (L×W×D) | 138×80×35 mm |
| MT-7071K Receiver specifications | |
| Signal status indication | 1 kHz , 1 LED & Buzzer, bulding ear jack |
| NCV indication & LED illumination | 1 LED (AC90~1000V) & 1 LED |
| Dimension (L×W×D) | 198×45×33 mm |
| MT-7071 Remote unit specifications | |
| Remote unit | 1+8 pcs remote units, (Included) |
| Compatible connectors | RJ45(8 pin)、RJ11/12(6 pin)、BNC connectors |
| Remote unit dimension (L×W×D) | 90×32×30mm |
| Accessories | RJ45 cable patch cord、RJ11/12 cable patch cord、Alligator clips patch cord、Earphone、pounch bag |
Reviews
There are no reviews yet.